Influence of target surface degradation on the properties of r.f. magnetron‐sputtered calcium phosphate coatings

This paper reports a detailed study of how repeated r.f. magnetron sputtering from a hydroxyapatite (HA) powder target affects the nature and reproducibility of a sequential series of thin‐film coatings deposited onto Ti6Al4V substrates. An evaluation of the effective lifespan of the HA sputter targets and the reproducibility of the calcium phosphate (CaP) coatings produced from them has been made from Fourier transform infrared spectroscopy, XPS and, as appropriate, atomic force microscopy and SEM/energy dispersive x‐ray analyses. The annulus region of the target surface, from which sputtering under r.f. magnetron conditions normally occurs, showed severe surface degradation after only one deposition run, as indicated by significant PO₄^3? and OH^? depletion. This deterioration continued after each subsequent deposition cycle but to a much lesser extent than that observed in the initial sputtering period. The layers produced from all of the sputter runs contained the expected Ca²⁺ and PO₄^3? species characteristic of a CaP system but were OH^? deficient in the as‐deposited state. However, the chemical and morphological properties of the coatings did not change significantly until after the third consecutive sputter cycle. Hence, these data indicate that, even though a significant level of degradation of the HA target occurs at the outset of the sputtering procedure, the general plasma conditions employed here have a dominant influence on the coating properties until a critical degradation condition is met. As such, the compacted HA powder targets of interest can have a life‐cycle greater than single usage without detriment to the chemistry and morphology of the coatings produced from them. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis, Crystal Structure and Inhibition of the K562 Cell Proliferation of N＇-Tertbutylaminocarbonyl-N-2-chlorophenoxyacetylthiourea

The title compound N'-tert-butylaminocarbonyl-N-2-chlorophenoxyacetylthiou- rea has been synthesized for the first time. Complete assignments were achieved by IR, 1H NHR and single-crystal X-ray diffraction analyses. The inhibitory rate of the cellular growth of K562 cells (chronic myeloid 1eukemic cells) was measured using MTT [3-(4,5-dimethylthiazo-2-y1)-2,5-di- phenyltetra-zolium bromide] assay. The cell apoptosis was assessed by agarose gel electrophoresis to find that the title compound has antiproliferation and apoptosis inducing effects on K562 cells. In order to investigate the relationship between structure and activity of the target compound, we report its crystal structure and biological behavior in the present paper. Crystallographic data: C14H18- ClN3O3S, Mr = 343.82, orthorhombic, space group Pnma, a = 19.786(6), b = 6.789(2), c = 12.938(4) , V = 1738.0(9) 3, Z = 4, Dc = 1.314 g/cm3, F(000) = 720, μ(MoKα) = 0.354 mm-1, R = 0.0378 and wR = 0.0941. The molecule is a planar structure.     

基于课程标准的教学——以常见阴、阳离子的检验为例

以常见的阴、阳离子的检验为例，研究了如何实施基于标准的教学。校本教材的开发为标准、教材、教学、评价的一致性提供保障；以学生应知的和能做的驱动课堂活动；根据达成标准应有怎样的质量表现，试卷编制先于教学设计。课堂上，“教”“学”双方都明确学习目标，教师提供多种策略来满足学生多样的学习需要，如提供工具，搭建脚手架，并以“微”研究性学习的方式展开教学，给学生提供了充分的进步空间。     

黑腔靶X光转换,输运的定量测量

为了测量黑腔靶X光引光效率、转换效率,我们设计了相应的分解靶(泄漏靶)实验,1989～1992年在″神光″装置上共进行了四次漏靶分解实验,利用灵敏度作了绝对标定的平响应X光二极管对漏靶注入孔、引光孔流出的X光角分布进行了测量,测出了x光角分布,得到了黑腔靶X光转换效率为50％～60％,引光效率约6％,为以后辐射驱动内爆研究的理论计算和靶的优化设计提供了重要的数据。     

Fe3O4/TiO2 纳米材料靶上脱盐的基质辅助激光解析/电离质谱新方法研究

建立了一种简便、高效的靶上脱盐新方法。利用Fe3O4/TiO2磁性纳米材料对肽段的吸附作用,将其作为载体用于靶上肽段富集和脱盐。在对纳米材料使用量、浸洗条件进行优化的基础上,成功地鉴定了溶于10mol/L尿素溶液的100fmol的肌红蛋白样品,也对溶于3mol/L尿素溶液中的10fmol的肌红蛋白样品进行了成功地分析鉴定。通过对肌红蛋白样品进行预处理和质谱分析重复实验,表明该方法重现性好,且简便、高效,所需时间短,一次可同时处理多个样品,易于实现通量化,为有效地解决目前蛋白质组分析中所面临的基质辅助激光解析/离子化飞行时间质谱耐盐性差的问题提供了一种新的手段。     

Multivariate analysis of non-homogeneous peaks in liquid chromatography

Summary The effects of concentration, separation and spectral similarity as factors influencing the accuracy of iterative target testing factor analysis (ITT-FA) are investigated for three component systems by the application of analysis of variance (ANOVAR). ANOVAR is applied over a range of peak separations to map the changing effects of the three factors with increasing overlap. Two error responses were measured and analysed, (a) Relative cluster error (RCE) a measure of the error over all peaks in a cluster and (b) Relative peak error (RPE) the error of an individual peak. Multicomponent analysis (MCA) a method requiringa priori spectral information, is used as a referee method for ITT-FA.     

Monte Carlo simulation of spatial distribution of X rays in multifilm targets. III: optimum design as applied to W/Al‐film targets

The brightness of the X‐ray source in a W/Al‐film target used for X‐ray projection microscopy was studied by an approach using the Monte Carlo simulation. Since continuous X rays generated in a thin film have a specific angular distribution of emission, the brightness of the continuous X‐ray source cannot simply be estimated on the assumption that the angular distribution is homogeneous. The newly developed approach using the Monte Carlo simulation enables the evaluation of the effective source size, angular distribution, and brightness of a continuous X‐ray source with sufficient accuracy that it leads to the optimum design of a high‐brightness X‐ray source for uses such as X‐ray projection microscopy. The Monte Carlo calculations were performed for W(Δz)/Al (200 µm)‐film targets with different thicknesses of W film, Δz, under bombardment of 60 kV electrons. The results have suggested an optimum design consisting of a W (2 µm)/Al (200 µm)‐film target as most promising for providing an X‐ray source of higher brightness than the W (5 µm)/Al (200 µm)‐film target, which has already been in practice for X‐ray projection microscopy. Copyright © 2006 John Wiley & Sons, Ltd.     

神光-Ⅱ装置三倍频实验中靶场单元技术的改进

 主要介绍为了满足神光-Ⅱ高功率激光装置三倍频光（351nm，3ω）的物理实验要求，靶场三倍频模拟光源和瞄准监视系统两个主要单元技术的改进，即三倍频模拟光源由基频光（1 053nm，3ω）通过腔外的KTP+BBO晶体倍频获得，再经八路分光系统和主激光耦合；瞄准监视系统由透射式光学系统改进为反射式光学系统，避免原系统存在较大的色差，提高瞄准精度。     

Observation of defect clustering in Gd-doped calcium fluoride

Abstract

Solid solutions Ca_1-xGd_xF_2+x for 3 × 10^?7≤ x ≤10^?1 have been studied by electron paramagnetic resonance (EPR) and ionic thermal currents (ITC). The EPR experiments show the presence of two single-ion sites a cubic and a tetragonal Gd³⁺ center which co-exist with comparable abundances for intermediate impurity concentrations. The cubic center predominates at very low and high concentrations. Seven different relaxation processes have been identified from the ITC spectra and the variation of their intensity vs. x was measured. The absolute concentrations of the cubic and nn Gd³⁺ dipoles were calculated. The scavenging of interstitial fluorines by the neutral clusters explains both the abundance of cubic sites at high concentration and the variety of orientable clusters detected by ITC.     

Influence of Control Parameters on the Competition Between Spiral Waves and Target Waves

In this paper we systematically investigate the influence of control parameters on the competition results between spiral waves and target waves. Driving frequency f , amplitude A and injection area n of the input signals are three important parameters and the competition results between spiral waves and target waves are influenced by these three parameters remarkably. Based on these understandings we can control spiral waves effectively by suitable combination these parameters to generate faster target waves. And the effective controllable parameter regions are also studied.